BCVCT - GC-408 CLASS A

Product Identification

Product ID:GC-408 CLASS A
MSDS Date:01/01/1985
FSC:8030
NIIN:00-007-8337
Kit Part:Y
MSDS Number: BCVCT

Responsible Party
GOAL CHEMICAL SEALANTS CORP.

Emergency Phone: (213) 269-0461

Cage: 04011

Contractor
GOAL CHEMICAL SEALANTS CORP
LOS ANGELES, CA 90023-4206 US

Telephone: 213-269-0461

Cage: 04011

Ingredients

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 31.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


POLYSULFIDE

Fraction By Weight: 56.2%


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 12.6%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


THIRAM (SARA III)

CAS: 137-26-8

RTECS: JO1400000

Fraction By Weight: 0.20%

OSHA PEL 5 MG/M3

ACGIH TLV: 1 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


MANGANESE DIOXIDE (AS MANGANESE)

CAS: 1313-13-9

RTECS: OP0350000

OSHA PEL C,5 MG/M3/1 FUME TWA

ACGIH TLV: 5 MG/M3 DUST/1 FUME

Hazards

Effects of Overexposure:EYE,SKIN:IRRITATION;INHALE:DIZZINESS DUE TO
TOLUENE.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR;SKIN,EYES:FLUSH W/LARGE AMOUNT OF
WATER;INGEST:ADMINISTER EMETIC. CALL DR.NOTE:WASH SKIN AFTER EACH
USE WITH SOAP AND WATER.

Fire Fighting

Flash Point:77F,25C OC
Extinguishing Media:CO*2, H*2O, ETC.
Fire Fighting Procedures:NO SPECIAL PROCEDURES
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARD

Accidental Release

Spill Release Procedures:GENERAL CLEAN-UP SCRAPE UP EXCESS MATERIAL,
CLEAN RESIDUE W/SOLVENT

Handling

Handling and Storage Precautions:STORE BELOW 80F.

Exposure Controls

Respiratory Protection:RECOMMENDED-SOLVENT VAPORS. USE NIOSH/MSHA
APPROVD DEVICE
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NO SPECIAL EQUIPMENT BESIDES ABOVE.
Supplemental Safety and Health
THE DRYING TIME VARIES FROM 1/2 HOUR TO 2 HOURS DEPENDING ON THE AMOUNT
OF MANGANESE DIOXIDE ADDED TO THE PRODUCT.PART A OF A TWO PART
KIT.KEY1:F4.

Chemical Properties

HCC:F4
Spec Gravity:1.47
Appearance and Odor:LIGHT TO DARK GREY WHEN MIXED; MERCAPTAN

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPERATURES ABOVE 300 F
Hazardous Decomposition Products:SO*2,H*2S, AND OTHER SULFUR COMPOUNDS

Disposal

Waste Disposal Methods:MFR RECM GENTERAL TRASH DISPOSAL. DISPOSE IAW
FED.,STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.